米制90°沉頭螺栓 BS 4933 - 1973
|
||||||||||||||||||||||||||||||||||||||||||||
|
|
| ①,L≤125mm時，b=2d+6； 125＜L≤200mm時，b=2d+12； L＞200mm時，b=2d+25； ②,本標準中并未規定公稱長度L，但可能在新版本中有所包含。 |
注：技術數據僅供參考，請以官方原件為準！
類似標準及供貨信息
| 1 |
![英制沉頭（開槽）螺栓 [Table7] (A307, SAE J429, F468, F593)](http://img.164580.com/upload/48/pic/2023/08/28/1693187227838259597.jpg)
|
[美標] ASME/ANSI B 18.5 (T7) - 2012 |
英制沉頭（開槽）螺栓 [Table7] (A307, SAE J429, F468, F593) Countersunk Bolts and Slotted Countersunk Bolts [Table7] (A307, SAE J429, F468, F593) |
| 2 |
|
[美標] ASME/ANSI B 18.5 (T7) - 2008 |
英制沉頭（開槽）螺栓 [Table7] Countersunk Bolts and Slotted Countersunk Bolts,(Inch Series) |
| 3 |
|
[歐標] EN 14399-7 (Cs bolt) - 2018 |
預負載用高強度結構螺栓連接副，第7部分：HR系統 - 沉頭螺栓 High-Strength Structural Bolting Assemblies for Preloading - Part 7: System HR - Countersunk Head Bolt |
| 4 |
|
[歐標] EN 14399-7 (Cs bolt) - 2007 |
預負載用高強度結構螺栓連接副，第7部分：HR系統 - 沉頭螺栓 High-strength Structural Bolting Assemblies for Preloading - Part 7: System HR — Countersunk Head Bolt |
| 5 |
|
[法國] NF E 25-801-7 - 2008 |
鋼結構用高強度一字槽沉頭螺栓 High Strength Slotted Bolts for Steel Structure |
| 6 |
|
[軍標] GJB 3371 (/48~/56) - 1998 |
100°沉頭螺栓 100° Countersunk Head Bolts |
| 7 |
|
[軍標] GJB 3371 (/63) - 1998 |
光桿公差帶h8短螺紋 100°沉頭螺栓 100° Countersunk Head Bolts, Short Thread, Shank Tolerance h8 |
| 8 |
|
[軍標] GJB 3371 (/67) - 1998 |
100°沉頭錐端螺栓 100° Countersunk Head Bolts with Cone Point |
| 9 |
|
[軍標] GJB 3371 (/83) - 1998 |
光桿公差帶r6短螺紋 100°沉頭螺栓 100° Countersunk Head Bolts, Short Thread, Shank Tolerance r6 |
| 10 |
|
[軍標] GJB 134.2 - 1986 |
光桿公差帶r6抗剪型100°沉頭高鎖螺栓 Hi-lock Bolts, 100° Head, Shear, Shank Tolerance r6 |
| 11 |
|
[軍標] GJB 134.3 - 1986 |
光桿公差帶f9抗剪型100°沉頭高鎖螺栓 Hi-lock Bolts, 100° Head, Shear, Shank Tolerance f9 |
| 12 |
|
[軍標] GJB 134.4 - 1982 |
光桿公差帶r6抗剪型平頭高鎖螺栓 Hi-lock Bolts, Protruding Head, Shear, Shank Tolerance r6 |
| 13 |
|
[美標] ASME B 18.5 (T7) - 2012 (2017) |
英制沉頭（開槽）螺栓 [Table7] (A307, SAE J429, F468, F593) Countersunk Bolts and Slotted Countersunk Bolts [Table7] (A307, SAE J429, F468, F593) |
| 14 |
|
[航空] HB 7438 - 2013 |
MJ螺紋十字槽100°沉頭螺栓 100° Countersunk Head Bolts with MJ Thread, Cross-recessed |
| 15 |
|
[航空] HB 1- 154 - 1995 |
錐形螺栓 Tapered Bolts |
| 16 |
|
[航空] HB 1- 154 - 1983 |
錐形螺栓 Tapered Bolts |
© 易緊通 服務熱線：4006-164580（免長途費）