鋼結構用扭剪型高強度螺栓 (ASTM F 1852 / ASTM F 2280) ASME B 18.2.6 - 2006
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ①,材料和機械性能應符合ASTM F 1852或ASTM F 2280的要求。 |
長度及長度公差
長度L通常以1/4英寸增量。下表為長度公差：
螺栓規格 | 長度L≤6英寸 | 長度L＞6英寸 |
1/2 | -0.12 | -0.19 |
5/8 | -0.12 | -0.25 |
3/4 ~ 1 | -0.19 | -0.25 |
1-1/8 ~ 1-1/2 | -0.25 | -0.25 |
注：技術數據僅供參考，請以官方原件為準！
類似標準及供貨信息
| 1 |
|
[國標] GB /T 3632 (S) - 2008 |
鋼結構用扭剪型高強度螺栓 Torshear Type High Strength Bolt for Steel Structures 供應商(5) |
| 2 |
|
[國標] GB /T 3632 (S) - 1995 |
鋼結構用扭剪型高強度螺栓 Torshear Type High Strength Bolt for Steel Structures 供應商(5) |
| 3 |
|
[國標] GB /T 32076.8 - 2017 |
預載荷高強度栓接結構連接副：扭剪型圓頭螺栓 High-strength Structural Bolting Assemblies for Preloading - Torshear Type Bolt with Cup Head |
| 4 |
|
[歐標] EN 14399-10 (Cup Bolt) - 2018 |
預負載用高強度結構螺栓連接副，第10部分：HRC系統 - 扭剪型圓頭螺栓 High-Strength Structural Bolting Assemblies for Preloading - System HRC - Bolt HRC with Cup Head |
| 5 |
|
[美標] ASME B 18.2.6 - 2019 |
扭剪型高強度螺栓 (平圓頭) (ASTM F3125 / F3125M) Twist-Off-Type Tension Control Structural Bolts: Heavy Round Head Configurations (ASTM F3125 / F3125M) |
| 6 |
|
[美標] ASME B 18.2.6 - 2010 |
扭剪型高強度螺栓 (平圓頭) (ASTM F 1852 / ASTM F 2280) [Table 7] Twist-off-type Tension Control Structural Bolts: Heavy Round Head Configurations (ASTM F 1852 / ASTM F 2280) |
| 7 |
|
[日標] JSS II 09 (-1) - 1996 |
結構連接用扭剪型高強螺栓 Torsional Shear Type High Strength Bolt for Structural Connection |
© 易緊通 服務熱線：4006-164580（免長途費）