十字復合槽六角凸緣頭螺釘 [TABLE 2.2.10-3] ASME B 18.6.3 (H10C) - 2024
| 選擇規格尺寸 點擊↓ 4# 5# 6# 8# 10# 12# 1/4 5/16 3/8 |
尺寸單位:
inch |
|
![ASME B 18.6.3 (H10C) - 2024 十字復合槽六角凸緣頭螺釘 [TABLE 2.2.10-3]](https://img.164580.com/upload/48/pic_cadpara/1494_zh.png?ue=1751812916&local=cache&tp=canvas&pict=png)
![美標ASME B18.6.3 (H10C) - 2024 ASME18.6.3 十字復合槽六角凸緣頭螺釘 [TABLE 2.2.10-3]](https://img.164580.com/upload/48/pic/2023/11/17/1700209985051147159.jpg)
![ASME B 18.6.3 (H10C) - 2024 十字復合槽六角凸緣頭螺釘 [TABLE 2.2.10-3]](https://img.164580.com/upload/48/qrcode_standardurl/24968.png)
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ①,允許六角面所有邊緣和棱角略有圓鈍。 ②,六角面與凸緣頂面結合處的圓角半徑R不得大于螺釘公稱直徑的0.15倍。 ③,若以小數規定公稱直徑，應省略小數前和小數點后第四位的零。 ④,十字槽插入測量深度由開槽槽深和十字槽槽深兩部分組成，由于凹穴槽深的變化是客觀存在的，故十字槽插入測量深度可由制造者和用戶協商確定。 ⑤,最小槽深比開槽六角頭的槽深約小10%。凹穴型凹穴底部以下的槽深度應不小于最小槽深規定值的的1/3。 |
長度公差
Machine screws can be made to any length, but they are generally produced in fractional length increments of 1/16 in. for screws up to 5/8 in. long, 1/8 in. for screws over 5/8 in. through 1-1/2 in. long, and 1/4 in. for screws over 1-1/2 in. long.
標稱螺釘尺寸的長度公差 | |||
標稱螺釘長度 | 螺紋規格 | ||
0000~00 | 0~12 | 1/4~3/4 | |
≤1/2 | -0.01 | -0.02 | -0.03 |
＞1/2,≤1 | -0.02 | -0.03 | -0.03 |
＞1,≤2 | / | -0.06 | -0.06 |
＞2 | / | -0.09 | -0.09 |
類似標準及供貨信息
| 1 |
|
[機械行業] JB /T 14722 (A) - 2024 |
復合槽小盤頭螺釘 Complex Groove SmalI Pan Head Screws |
| 2 |
|
[機械行業] JB /T 14723 - 2024 |
復合槽小盤頭螺釘 Complex Groove Small Pan Head Screw |
| 3 |
|
[機械行業] JB /T 14724 - 2024 |
復合槽圓柱頭螺釘 Complex Groove Cap Head Screw |
| 4 |
|
[機械行業] JB /T 14725 - 2024 |
復合槽圓柱頭圓柱端斷路器用螺釘 Complex Groove Cheese Head Screws with Dog Point for Circuit-breakers |
| 5 |
|
[機械行業] JB /T 14726 - 2024 |
復合槽圓柱頭球面端螺釘 Complex Groove Cheese Head Screws with Rounded End |
| 6 |
|
[美標] ASME/ANSI B 18.6.3 (T20) - 2010 |
十一字槽盤頭螺釘Table20 Combination Slotted-Cross Recessed Round Head Machine Screws 供應商(4) |
| 7 |
|
[標準] YJT 4016 |
塑料十一字槽圓柱頭頭部帶孔螺釘 Plastic Composit Slot Screws with Hole Through Cheese Head |
| 8 |
|
[美標] ASME B 18.6.3 (H5D) - 2024 |
復合十字槽盤頭螺釘 (ASTM F837, F468) [TABLE 2.2.5-4 I/IA/III] Combination Slotted-Pan Head Screws (ASTM F837, F468) [TABLE 2.2.5-4 I/IA/III] 供應商(4) |
| 9 |
|
[美標] ASME B 18.6.3 (T20) - 2013 |
復合十字槽盤頭螺釘 [Table 20] (ASTM F837, F468) Combination Slotted - Pan Head Screws (ASTM F837, F468) 供應商(4) |
| 10 |
![I型 復合槽大扁頭螺釘 [TABLE 2.2.7-3 I]](http://img.164580.com/upload/48/pic/2023/11/23/1700706833679115634.jpg)
|
[美標] ASME 18.6.3 (H7C-I) - 2024 |
I型 復合槽大扁頭螺釘 [TABLE 2.2.7-3 I] Combination Slotted Truss Head Screws - Type I [TABLE 2.2.7-3 I] |
| 11 |
![III型 復合槽大扁頭螺釘 [TABLE 2.2.7-3 III]](http://img.164580.com/upload/48/pic/2023/12/26/1703555822611667614.jpg)
|
[美標] ASME B 18.6.3 (H7C-III) - 2024 |
III型 復合槽大扁頭螺釘 [TABLE 2.2.7-3 III] Combination Slotted Truss Head Screws - Type III [TABLE 2.2.7-3 III] |
| 12 |
![復合十字槽圓頭螺釘 [TABLE 2.2.11-3]](http://img.164580.com/upload/48/pic/2023/11/20/1700467297944812968.jpg)
|
[美標] ASME B 18.6.3 (H11C-I/H11C-IA) - 2024 |
復合十字槽圓頭螺釘 [TABLE 2.2.11-3] Combination Slotted Round Head Screws [TABLE 2.2.11-3] |
| 13 |
|
[美標] ASME B 18.6.3 (T34) - 2013 |
十字復合槽六角凸緣頭螺釘 Combination Slotted Type I Indented Hex Washer Head Screws |
| 14 |
|
[美標] ASME B 18.6.3 (T37-I T37-IA) - 2013 |
復合十字槽圓頭螺釘 Combination Slotted Round Head Screws |
| 15 |
|
[美標] ASME B 18.6.3 (T26-I) - 2013 |
I型復合槽大扁頭螺釘 Combination Slotted Truss Head Screws，Type I |
| 16 |
|
[美標] ASME B 18.6.3 (T26-III) - 2013 |
III型復合槽大扁頭螺釘 Combination Slotted Truss Head Screws，Type III |