十字槽半沉頭自擠鎖緊螺釘 — NE型 DIN 7500 (NE) - 2009

選擇規格尺寸點擊↓

M2.5

M3.5

M10

尺寸單位: mm

掃一掃分享

單重計算公差

螺紋尺寸
d

M2.5

M3.5

M10

①,材料：采用冷鐓、表面硬化的優質鋼材。核心硬度必須為 290 HV10 至 370 HV10。熱處理后的表面硬度必須至少為450 HV0.3。按標準DIN EN ISO 7085

替代列表

DIN 7500N - 1984 DIN 7500NE - 1995 DIN 7500NE - 2009

等效標準

德標 DIN	意大利 UNI
DIN 7500(NE)	UNI 8114

以上有部分標準可能為近似等效，如有異議以標準原件為準

采用標準

注：技術數據僅供參考，請以官方原件為準！

類似標準及供貨信息

1	[國標] GB /T 6562 - 2014	十字槽半沉頭自擠螺釘 Cross Recessed Raised Countersunk Head Thread Forming Screws 供應商(1)
2	[國標] GB /T 6562 - 1986	十字槽半沉頭自攻鎖緊螺釘 Cross Recessed Raised Countersunk Head Thread Forming Screws 供應商(1)
3	[德標] DIN 7500 (NE) - 1995	十字槽半沉頭自擠鎖緊自攻釘 Cross Recessed Raised Countersunk Head Thread Rolling Screws
4	[德標] DIN 7500 (N) - 1984	十字槽半沉頭自擠鎖緊自攻釘 Cross Recessed Raised Countersunk Head Thread Rolling Screws
5	[汽標代號] Q 264	十字槽半沉頭自攻鎖緊螺釘 Cross Recessed Raised Countersunk Head Thread Forming Screws
6	[意大利] UNI 8114	十字槽半沉頭三角鎖緊螺釘 Cross Recessed Raised Countersunk Head Forming Screws