| 牌號 | EFeCr-AlA |
|---|---|
| W74011 | |
| 對應標準 | AWS A5.13/A5.13M-2010
堆焊焊條規范 保護金屬電弧焊 Specification for Surfacing Electrodes for Shielded Metal Arc Welding |
| 歸類 | 合金鋼 |
| 標簽 | 鐵基堆焊焊條 |
| 說明 | Characteristics. Weld metal deposited by these electrodes will contain massive chromium carbides in an austenitic matrix providing excellent wear resistance and toughness. Surface checks are typical and give some degree of stress relief. Deposits cannot be machined and must be ground when finishing is required. To ensure the desired deposit composition, two layers are recommended. Additional layers invite spalling and must be applied with caution. Electrodes are suitable for welding on carbon, alloy, and austenitic steels as well as cast irons. The weld metal deposited by EFeCr-A1A electrodes generally provides greater resistance to impact but slightly less abrasion resistance than weld metal deposited by EFeCr-A4 electrodes. Applications. Deposits frequently are used to surface parts and equipment involved in sliding and crushing of rock, ore, etc., such as bucket lips and teeth, impact hammers, and conveyors. Very low coefficients of friction develop as a result of scouring by earth products. |
注：數據僅供參考！如有疑問，請填寫"我要糾錯"！