| 牌號 | X6NiCrTiMoVB25-15-2 |
|---|---|
| 1.4980 | |
| 對應標準 | NF EN 10269-1999
用于高溫或低溫條件下的緊固件用鋼及鎳合金 Steels and Nickel Alloys for Fasteners with Specified Elevated and/or Low Temperature Properties |
| 歸類 | 奧氏體不銹鋼 |
| 密度 | 8 g/cm3 |
-
交付條件下在高溫下的最小屈服強度
Material designation Heat treatment
conditionDiameter
d
mmMinimum 0.2%-proof strength Rp0.2 in MPa at a temperature (in°C) of: Name Number 50 100 150 200 250 300 350 400 450 500 550 600 650 X6NiCrTiMoVB25-15-2 1.4980 +AT+P d≤160 592 580 570 560 550 540 530 520 510 490 460 430 380
-
Material designation Heat treatment
conditionDiameter
d
mmMinimum tensile strength Rm in MPa at a temperature (in°C) of: Name Number 50 100 150 200 250 300 350 400 450 500 550 600 650 X6NiCrTiMoVB25-15-2 1.4980 +AT+P d≤160 n.a. n.a. n.a. n.a. n.a. n.a. n.a. 720 710 700 690 670 - n.a.: no values available
-
低溫最小沖擊吸收能量（縱向）
Material designation Heat treatment
conditionDiameter
d
mmMinimum fracture energy in shock bending (in J) (ISO-V specimens) at a temperature (in ℃) of: Name Number -270 -196 -160 -140 -120 -110 -100 -90 -80 -70 -60 -50 -40 -20 0 +20 X6NiCrTiMoVB25-15-2 1.4980 +AT+P d≤160 - 40 - - - - - - - - - - - - - 50
-
符合本歐洲標準的產品熱處理指南
Material designation Heat treatment
conditionNormalizing,quenching
or solution annealing
temperature
°CType of
cooling①Tempering or
precipitation
treatment (and time)
°CName Number X6NiCrTiMoVB25-15-2 1.4980 +AT+P 970 to 990 o,w 710 to 730 ◎ 根據原件相關規定，如果允許矯直后消除應力，應選擇消除應力的溫度，以獲得規定的性能。 ① a=air; o=oil; w=water
-
物理性能
各溫度°C時靜態彈性模量 20°C與各溫度間熱膨脹系數 熱導率 比熱容 電阻率 20 100 200 300 400 500 600 700 800 100°C 200°C 300°C 400°C 500°C 600°C 20°C 20°C 20°C GPa 10-6 K-1 W/m.K J/kg.K Ω.mm2/m 211① 206① 200① 192① 183① 173① 162① - - 17 17.5 18.7 18 18.2 18.5 n.a. n.a. n.a. n.a.: no values available ① 動態彈性模量
-
蠕變性能
Designation Temperature Strength for
1% (plastic)
creep strain ①Creep rupture
strength for ②Name Number °C 10000h 100000h 10000h 100000h 200000h X6NiCrTiMoVB25-15-2 1.4980 500 580 495 608 545 - 510 555 475 590 520 - 520 530 450 570 495 - 530 505 425 550 470 - 540 485 400 525 445 - 550 460 375 500 415 - 560 435 345 475 385 - 570 410 315 450 355 - 580 380 280 420 320 - 590 350 250 395 285 - 600 320 220 365 250 - 610 290 195 340 220 - 620 260 170 310 195 - 630 235 150 285 170 - 640 210 130 260 150 - 650 190 110 235 132 - ◎ The values given in this table are the mean values of the scatter band so far obtained, which will be checked from time to time as further test results become available and if necessary corrected.
◎ * and () indicate values of extended stress extrapolation or time extrapolation, respectively.
① This is the stress relative to the initial cross- section leadina to a permanent elongation of 1 % after 10000 h and 100000 h.
② This is the stress relative to the initial cross- section leading to fracture after 10000 h, 100000 h and 200000 h.
注：數據僅供參考！如有疑問，請?zhí)顚?我要糾錯"！